Hello, I am new to this e-group,

I am not new to Pagestream, I had used it many years ago on the Amiga.

I do have one question, I understand you have a Linux version.
I currently run 3 Ultra 5 Sparc Systems (Sparc 64) running Gentoo Linux,
which is a source based linux distribution.
I was interested in using Pagestream Linux, is there a sparc64 version
available. Or can one be compiled?

Jack Boling

X-Team - Xenolink/Amiga

[Non-text portions of this message have been removed]

Hi,

At this time we are just working on the Linux x86 version. As none of the
code is in assembly, and the code already addresses
big-endian/little-endian issues, it should not be difficult to compile for
other processors. However, since I don't have a Sparc system here, the best
we could do would be to cross-compile for it and let someone else give it a
try. I presume that there exists such a cross-compiler. Now are you the
someone else you wants to give it a try?

>Hello, I am new to this e-group,
>
>I am not new to Pagestream, I had used it many years ago on the Amiga.
>
>I do have one question, I understand you have a Linux version.
>I currently run 3 Ultra 5 Sparc Systems (Sparc 64) running Gentoo Linux,
>which is a source based linux distribution.
>I was interested in using Pagestream Linux, is there a sparc64 version
>available. Or can one be compiled?
>
>Jack Boling
>
>X-Team - Xenolink/Amiga

Deron Kazmaier - support@grasshopperllc.com
Grasshopper LLC Publishing -http://www.grasshopperllc.com
PageStream DTP for Amiga, Linux, Macintosh, and Windows

[Non-text portions of this message have been removed]

Are you compiling using gcc?

-----Original Message-----
From: PageStream Support [mailto:support@grasshopperllc.com]
Sent: Friday, September 05, 2003 12:24 PM
To: PageStreamLinuxBeta@yahoogroups.com
Subject: [PageStreamLinuxBeta] Re: Sparc Version

Hi,

At this time we are just working on the Linux x86 version. As none of
the
code is in assembly, and the code already addresses
big-endian/little-endian issues, it should not be difficult to compile
for
other processors. However, since I don't have a Sparc system here, the
best
we could do would be to cross-compile for it and let someone else give
it a
try. I presume that there exists such a cross-compiler. Now are you the
someone else you wants to give it a try?

>Hello, I am new to this e-group,
>
>I am not new to Pagestream, I had used it many years ago on the Amiga.
>
>I do have one question, I understand you have a Linux version.
>I currently run 3 Ultra 5 Sparc Systems (Sparc 64) running Gentoo
Linux,
>which is a source based linux distribution.
>I was interested in using Pagestream Linux, is there a sparc64 version
>available. Or can one be compiled?
>
>Jack Boling
>
>X-Team - Xenolink/Amiga

Deron Kazmaier - support@grasshopperllc.com
Grasshopper LLC Publishing -http://www.grasshopperllc.com
PageStream DTP for Amiga, Linux, Macintosh, and Windows

[Non-text portions of this message have been removed]

Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/M=259538.3830715.5078802.1261774/D=egroupweb/S=1706
030429:HM/A=1750876/R=0/SIG=11v1mrq3u/*http://hits.411web.com/cgi-bin/hi
t?page=1762-1062629109228440> click here

<http://us.adserver.yahoo.com/l?M=259538.3830715.5078802.1261774/D=egrou
pmail/S=:HM/A=1750876/rand=867319205>

To unsubscribe from this group, send an email to:
PageStreamLinuxBeta-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

[Non-text portions of this message have been removed]

Yes. We use GCC on almost every platform now.

>Are you compiling using gcc?
>
>-----Original Message-----
>From: PageStream Support [mailto:support@grasshopperllc.com]
>Sent: Friday, September 05, 2003 12:24 PM
>To: PageStreamLinuxBeta@yahoogroups.com
>Subject: [PageStreamLinuxBeta] Re: Sparc Version
>
>
>Hi,
>
>At this time we are just working on the Linux x86 version. As none of
>the
>code is in assembly, and the code already addresses
>big-endian/little-endian issues, it should not be difficult to compile
>for
>other processors. However, since I don't have a Sparc system here, the
>best
>we could do would be to cross-compile for it and let someone else give
>it a
>try. I presume that there exists such a cross-compiler. Now are you the
>someone else you wants to give it a try?
>
>
> >Hello, I am new to this e-group,
> >
> >I am not new to Pagestream, I had used it many years ago on the Amiga.
> >
> >I do have one question, I understand you have a Linux version.
> >I currently run 3 Ultra 5 Sparc Systems (Sparc 64) running Gentoo
>Linux,
> >which is a source based linux distribution.
> >I was interested in using Pagestream Linux, is there a sparc64 version
> >available. Or can one be compiled?
> >
> >Jack Boling
> >
> >X-Team - Xenolink/Amiga
>

Deron Kazmaier - support@grasshopperllc.com
Grasshopper LLC Publishing -http://www.grasshopperllc.com
PageStream DTP for Amiga, Linux, Macintosh, and Windows

[Non-text portions of this message have been removed]

If you would like for me to test it on the Ultrasparc II processor,
I can do that, or if you need for me to compile it on Ultrasparc II I
can do that also.

Pagestream is a great product, currently there is nothing on Linux that
I know of that will do pantone colors
seperations and such.

Thank you,

Jack Boling

-----Original Message-----
From: PageStream Support [mailto:support@grasshopperllc.com]
Sent: Sunday, September 07, 2003 6:06 PM
To: PageStreamLinuxBeta@yahoogroups.com
Subject: [PageStreamLinuxBeta] Re: Sparc Version

Yes. We use GCC on almost every platform now.

>Are you compiling using gcc?
>
>-----Original Message-----
>From: PageStream Support [mailto:support@grasshopperllc.com]
>Sent: Friday, September 05, 2003 12:24 PM
>To: PageStreamLinuxBeta@yahoogroups.com
>Subject: [PageStreamLinuxBeta] Re: Sparc Version
>
>
>Hi,
>
>At this time we are just working on the Linux x86 version. As none of
>the
>code is in assembly, and the code already addresses
>big-endian/little-endian issues, it should not be difficult to compile
>for
>other processors. However, since I don't have a Sparc system here, the
>best
>we could do would be to cross-compile for it and let someone else give
>it a
>try. I presume that there exists such a cross-compiler. Now are you the
>someone else you wants to give it a try?
>
>
> >Hello, I am new to this e-group,
> >
> >I am not new to Pagestream, I had used it many years ago on the
Amiga.
> >
> >I do have one question, I understand you have a Linux version.
> >I currently run 3 Ultra 5 Sparc Systems (Sparc 64) running Gentoo
>Linux,
> >which is a source based linux distribution.
> >I was interested in using Pagestream Linux, is there a sparc64
version
> >available. Or can one be compiled?
> >
> >Jack Boling
> >
> >X-Team - Xenolink/Amiga
>

Deron Kazmaier - support@grasshopperllc.com
Grasshopper LLC Publishing -http://www.grasshopperllc.com
PageStream DTP for Amiga, Linux, Macintosh, and Windows

[Non-text portions of this message have been removed]

Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=1706
030429:HM/A=1693352/R=0/SIG=11tralmvc/*http://www.netflix.com/Default?mq
so=60178293&partid=3170658> click here

<http://us.adserver.yahoo.com/l?M=251812.3170658.4537139.1261774/D=egrou
pmail/S=:HM/A=1693352/rand=470964251>

To unsubscribe from this group, send an email to:
PageStreamLinuxBeta-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

[Non-text portions of this message have been removed]