Hi Deron:
I've only loaded version 5 on the laptop. When I did the
last work and bug reports on version 5, I didn't try
printing as I was modifying images and outputting them as
JPG's. Well, the other day I did some work that needed to be
printed. When I went to print, PgS didn't know the right PPD
file, so I found it and got PgS pointed in the right
direction, but no luck. I was able to move the file over to
the desktop machine and print it with version 4. Well to day
I finally installed .34 on the laptop. The PPD file is
correct but nothing is sent to the printer. My HP Laserjet
4000 never wakes up. I can't figure out what the problem
might be? Version 4 would always print from the laptop.

Looking for some guidance.

Peter Martin pjmartin@magma.ca

Hi,

Sounds like you have choosen "PostScript File". That won't send directly to
your printer. You need to choose "Windows" instead. The wording could
certainly be better.

>Hi Deron:
>I've only loaded version 5 on the laptop. When I did the
>last work and bug reports on version 5, I didn't try
>printing as I was modifying images and outputting them as
>JPG's. Well, the other day I did some work that needed to be
>printed. When I went to print, PgS didn't know the right PPD
>file, so I found it and got PgS pointed in the right
>direction, but no luck. I was able to move the file over to
>the desktop machine and print it with version 4. Well to day
>I finally installed .34 on the laptop. The PPD file is
>correct but nothing is sent to the printer. My HP Laserjet
>4000 never wakes up. I can't figure out what the problem
>might be? Version 4 would always print from the laptop.
>
>Looking for some guidance.
>
>Peter Martin pjmartin@magma.ca

Deron Kazmaier - support@grasshopperllc.com
Grasshopper LLC Publishing -http://www.grasshopperllc.com
PageStream DTP for Amiga, Linux, Macintosh, and Windows

[Non-text portions of this message have been removed]

Hi again:
Once I selected 'Windows' it then allowed me to go to
windows setup, which produced a requester that I'm familiar
with, but still nothing gets to the printer. I wondered if
something else might be wrong so I fired up WordPerfect. It
printed fine.

So I need to be guided a little further.

Thanks.

Peter Martin

PageStream Support wrote:
> Hi,
>
> Sounds like you have choosen "PostScript File". That won't send directly to
> your printer. You need to choose "Windows" instead. The wording could
> certainly be better.
>
>
>>Hi Deron:
>>I've only loaded version 5 on the laptop. When I did the
>>last work and bug reports on version 5, I didn't try
>>printing as I was modifying images and outputting them as
>>JPG's. Well, the other day I did some work that needed to be
>>printed. When I went to print, PgS didn't know the right PPD
>>file, so I found it and got PgS pointed in the right
>>direction, but no luck. I was able to move the file over to
>>the desktop machine and print it with version 4. Well to day
>>I finally installed .34 on the laptop. The PPD file is
>>correct but nothing is sent to the printer. My HP Laserjet
>>4000 never wakes up. I can't figure out what the problem
>>might be? Version 4 would always print from the laptop.
>>
>>Looking for some guidance.
>>
>>Peter Martin pjmartin@magma.ca
>
>
>
> Deron Kazmaier - support@grasshopperllc.com
> Grasshopper LLC Publishing -http://www.grasshopperllc.com
> PageStream DTP for Amiga, Linux, Macintosh, and Windows
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>

Peter Martin wrote:

>Hi again:
>Once I selected 'Windows' it then allowed me to go to
>windows setup, which produced a requester that I'm familiar
>with, but still nothing gets to the printer. I wondered if
>something else might be wrong so I fired up WordPerfect. It
>printed fine.
>
>So I need to be guided a little further.
>
>
If I can horn in here, when you click on the button on the right side of
printer/name: you should see a list of printers you have setup on Win.
Select the one you want and then you should have a succession of windows
that let you tailor your printing the way you want. I have a couple of
"print to file" printers set up and it works pretty well for me. Hope
this at least gets you past this little hurdle.

-----Don B

>Thanks.
>
>Peter Martin
>
>PageStream Support wrote:
>
>
>>Hi,
>>
>>Sounds like you have choosen "PostScript File". That won't send directly to
>>your printer. You need to choose "Windows" instead. The wording could
>>certainly be better.
>>
>>
>>
>>
>>>Hi Deron:
>>>I've only loaded version 5 on the laptop. When I did the
>>>last work and bug reports on version 5, I didn't try
>>>printing as I was modifying images and outputting them as
>>>JPG's. Well, the other day I did some work that needed to be
>>>printed. When I went to print, PgS didn't know the right PPD
>>>file, so I found it and got PgS pointed in the right
>>>direction, but no luck. I was able to move the file over to
>>>the desktop machine and print it with version 4. Well to day
>>>I finally installed .34 on the laptop. The PPD file is
>>>correct but nothing is sent to the printer. My HP Laserjet
>>>4000 never wakes up. I can't figure out what the problem
>>>might be? Version 4 would always print from the laptop.
>>>
>>>Looking for some guidance.
>>>
>>>Peter Martin pjmartin@magma.ca
>>>
>>>
>>
>>Deron Kazmaier - support@grasshopperllc.com
>>Grasshopper LLC Publishing -http://www.grasshopperllc.com
>>PageStream DTP for Amiga, Linux, Macintosh, and Windows
>>
>>
>>